提交 44c00337 编辑于 作者: Keller, Jacob E's avatar Keller, Jacob E 提交者: Robert Nelson
浏览文件

ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}



Ethernet drivers implementing both {GS}RXFH and {GS}CHANNELS ethtool ops
incorrectly allow SCHANNELS when it would conflict with the settings
from SRXFH. This occurs because it is not possible for drivers to
understand whether their Rx flow indirection table has been configured
or is in the default state. In addition, drivers currently behave in
various ways when increasing the number of Rx channels.

Some drivers will always destroy the Rx flow indirection table when this
occurs, whether it has been set by the user or not. Other drivers will
attempt to preserve the table even if the user has never modified it
from the default driver settings. Neither of these situation is
desirable because it leads to unexpected behavior or loss of user
configuration.

The correct behavior is to simply return -EINVAL when SCHANNELS would
conflict with the current Rx flow table settings. However, it should
only do so if the current settings were modified by the user. If we
required that the new settings never conflict with the current (default)
Rx flow settings, we would force users to first reduce their Rx flow
settings and then reduce the number of Rx channels.

This patch proposes a solution implemented in net/core/ethtool.c which
ensures that all drivers behave correctly. It checks whether the RXFH
table has been configured to non-default settings, and stores this
information in a private netdev flag. When the number of channels is
requested to change, it first ensures that the current Rx flow table is
not going to assign flows to now disabled channels.

Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
上级 cb4ee3d9
......@@ -1283,6 +1283,7 @@ struct net_device_ops {
* @IFF_NO_QUEUE: device can run without qdisc attached
* @IFF_OPENVSWITCH: device is a Open vSwitch master
* @IFF_L3MDEV_SLAVE: device is enslaved to an L3 master device
* @IFF_RXFH_CONFIGURED: device has had Rx Flow indirection table configured
*/
enum netdev_priv_flags {
IFF_802_1Q_VLAN = 1<<0,
......@@ -1309,6 +1310,7 @@ enum netdev_priv_flags {
IFF_NO_QUEUE = 1<<21,
IFF_OPENVSWITCH = 1<<22,
IFF_L3MDEV_SLAVE = 1<<23,
IFF_RXFH_CONFIGURED = 1<<25,
};
#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
......@@ -1335,6 +1337,7 @@ enum netdev_priv_flags {
#define IFF_NO_QUEUE IFF_NO_QUEUE
#define IFF_OPENVSWITCH IFF_OPENVSWITCH
#define IFF_L3MDEV_SLAVE IFF_L3MDEV_SLAVE
#define IFF_RXFH_CONFIGURED IFF_RXFH_CONFIGURED
/**
* struct net_device - The DEVICE structure.
......@@ -3958,6 +3961,11 @@ static inline bool netif_is_ovs_master(const struct net_device *dev)
return dev->priv_flags & IFF_OPENVSWITCH;
}
static inline bool netif_is_rxfh_configured(const struct net_device *dev)
{
return dev->priv_flags & IFF_RXFH_CONFIGURED;
}
/* This device needs to keep skb dst for qdisc enqueue or ndo_start_xmit() */
static inline void netif_keep_dst(struct net_device *dev)
{
......
......@@ -642,6 +642,37 @@ void netdev_rss_key_fill(void *buffer, size_t len)
}
EXPORT_SYMBOL(netdev_rss_key_fill);
static int ethtool_get_max_rxfh_channel(struct net_device *dev, u32 *max)
{
u32 dev_size, current_max = 0;
u32 *indir;
int ret;
if (!dev->ethtool_ops->get_rxfh_indir_size ||
!dev->ethtool_ops->get_rxfh)
return -EOPNOTSUPP;
dev_size = dev->ethtool_ops->get_rxfh_indir_size(dev);
if (dev_size == 0)
return -EOPNOTSUPP;
indir = kcalloc(dev_size, sizeof(indir[0]), GFP_USER);
if (!indir)
return -ENOMEM;
ret = dev->ethtool_ops->get_rxfh(dev, indir, NULL, NULL);
if (ret)
goto out;
while (dev_size--)
current_max = max(current_max, indir[dev_size]);
*max = current_max;
out:
kfree(indir);
return ret;
}
static noinline_for_stack int ethtool_get_rxfh_indir(struct net_device *dev,
void __user *useraddr)
{
......@@ -738,6 +769,14 @@ static noinline_for_stack int ethtool_set_rxfh_indir(struct net_device *dev,
}
ret = ops->set_rxfh(dev, indir, NULL, ETH_RSS_HASH_NO_CHANGE);
if (ret)
goto out;
/* indicate whether rxfh was set to default */
if (user_size == 0)
dev->priv_flags &= ~IFF_RXFH_CONFIGURED;
else
dev->priv_flags |= IFF_RXFH_CONFIGURED;
out:
kfree(indir);
......@@ -897,6 +936,14 @@ static noinline_for_stack int ethtool_set_rxfh(struct net_device *dev,
}
ret = ops->set_rxfh(dev, indir, hkey, rxfh.hfunc);
if (ret)
goto out;
/* indicate whether rxfh was set to default */
if (rxfh.indir_size == 0)
dev->priv_flags &= ~IFF_RXFH_CONFIGURED;
else if (rxfh.indir_size != ETH_RXFH_INDIR_NO_CHANGE)
dev->priv_flags |= IFF_RXFH_CONFIGURED;
out:
kfree(rss_config);
......@@ -1231,6 +1278,7 @@ static noinline_for_stack int ethtool_set_channels(struct net_device *dev,
void __user *useraddr)
{
struct ethtool_channels channels;
u32 max_rx_in_use = 0;
if (!dev->ethtool_ops->set_channels)
return -EOPNOTSUPP;
......@@ -1238,6 +1286,13 @@ static noinline_for_stack int ethtool_set_channels(struct net_device *dev,
if (copy_from_user(&channels, useraddr, sizeof(channels)))
return -EFAULT;
/* ensure the new Rx count fits within the configured Rx flow
* indirection table settings */
if (netif_is_rxfh_configured(dev) &&
!ethtool_get_max_rxfh_channel(dev, &max_rx_in_use) &&
(channels.combined_count + channels.rx_count) <= max_rx_in_use)
return -EINVAL;
return dev->ethtool_ops->set_channels(dev, &channels);
}
......
支持 Markdown
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册